|
 |
Home
About Us
Locations
Download Catalogs
Contact Us
|
|
Standard Lids
| HIGH DENSITY POLYETHYLENE LIDS | |||
| Item | Description | Part Number | Std. Pkg. |
|---|---|---|---|
- | 22" Lid and ring with air vent | 63679 | 6 |
| - | 16" Lid and ring with 4" center lid/air vent | 60038 | 14 |
| A | 16" Lid with 4" center lid/air vent | 60011 | 19 |
B | 16" Lid and ring with blue snap-in vent | 12 | |
| - | 16" Ring only | 60012 | - |
| - | 16" Lid, ventless with ring | 60367 | 10 |
| C | 16" Lid, ventless | 60365 | - |
| - | Ethafoam gasket for 16" non-hinged lid | 62941 | - |
| - | 4" Lid (air vent assembly for 16" lid (60038 and 60011) | 60019 | - |
- | Blue snap-in vent for 16" lid (63485) | - | |
| - | 8" Lid, ring and air vent | 60032 | 32 |
| D | 8" Lid with air vent (For select tanks manufactured prior to 2/2/08) | 60002 | 32 |
| - | 8" Ring only (for 60002 lid) | 60003 | - |
| - | Snap on air vent for 8" lid only (60002) | 61727 | - |
E | 8" Lid with blue snap-in vent (For select tanks manufactured after 2/2/08) | 63480 | 28 |
- | Blue snap-in vent for 8" lid (63480) | 63482 | - |
- | 5" Lid, hinged, for 110 Low Profile | 25 | |
| F | 5" Lid with ball check air vent (for tanks manufactured prior to 2/1/00) | 60322 | 72 |
| G | 5” Lid with ball check air vent (for tanks manufactured after 2/1/00) | 63484 | 48 |
- | 5" Lid with 2" FPT (does not include vent cap) | 45 | |
| - | EPDM gasket for 5" lids 60322, 63264 or 63484 | 60366 | - |
| - | 2" MPT vent cap with poly screen | 63266 | - |
| - | 18" lanyard for 8" lid and 16" non-hinged lid (tethers lid to tank) | 63251 | - |
| - | Stainless steel screw for 8" and 16" rings | 60081 | - |
| - | Strainer basket for 16" fill-opening (7" depth) | 67374 | - |
 |
Hinged Lids 
The hinged lid is manufactured from a co-polymer material for strength, durability and excellent chemical resistance. Our unique locking tab allows you to easily slip a padlock through it and secure your lid from theft or spills. The lid is interchangeable with a standard 16" lid and ring assembly if you choose to replace your existing lid.
Specific features of the lid:
- Easy open/close - opens a full 180 degrees
- Comes complete with a baffle vent assembly which allows for adequate venting when bottom filling your tank
- Unique locking tab
- All parts of lid may be ordered as repair parts
| HINGED LIDS | ||||
| Description | Part Number | Std Pkg | ||
|---|---|---|---|---|
| Complete lid assembly | 62532 | 6 | ||
| HINGED LIDS REPAIR PARTS | ||||
| Description | Part Number | Std Pkg | ||
|---|---|---|---|---|
| 16" hinged lid with vent assembly, without ring | 62826 | 6 | ||
| 16" hinged ventless lid with ring | 63390 | 6 | ||
| Vent assembly | 62827 | - | ||
| Ring Assembly | 62828 | - | ||
| Hinge Assembly | 62829 | - | ||
| *EPDM gasket | 63391 | - | ||
| **EPDM O-ring for lid | 62830 | - | ||
| Neoprene O-ring for ring | 62831 | - | ||
| *Lid with red center cap or ventless lid requires this gasket. | ||||
| **Lid with black center cap requires this o-ring. | ||||
Part dimensions may vary and are subject to change without notice.
© 2006 Norwesco Inc. |
|
|